Cloud Electronics PS16 - Manual (Page 12)

Pump Station 16-R: Installation and operation manual 11
16-07-02 V2.1
This Pump Station 16-R conforms to the following European EMC Standards:
BS EN 55103-1:1997
BS EN 55103-2:1997
This product has been tested for normal use in the commercial and light industrial environment. If the
equipment is used in controlled EMC environments, the urban outdoors, heavy industrial environments
or close to railways, transmitters, overhead power lines etc. the performance of the unit may be
degraded.
The Pump Station 16-R conforms to the following European electrical safety standard.
BS EN 60065:1998
The power transformers for the Pump Station 16-R conform to the following standards:
Power transformer for the UK market (Friwo 11.8367) BS EN60742 + BABT
Power transformer for the European market (Friwo 11.8366)
EN60742 + EN60950
Power transformer for USA and Canada (SHOGYO A572710OT)
C-UL Approved
Safety Considerations and Information
When the mains switch is in the off ‘O’ position the Pump Station 16-R is disconnected from the
power transformer
CAUTION – Installation
Do not expose the unit to water or moisture
Do not expose the unit to naked flames.
Do not block or restrict any air vent
Do not operate the unit in ambient temperatures above 35 o C
CAUTION – Servicing
The unit contains no user serviceable parts. Refer servicing to qualified service personnel. Do
not perform servicing unless you are qualified to do so.
Disconnect the power cable from the unit before removing the top or bottom panel
Only reassemble the unit using bolts/screws identical to the original parts
In the interest of continuing improvements Cloud Electronics Limited reserves the right to alter
specifications without prior notice.
Cloud Electronics Limited 140 Staniforth Road Sheffield S9 3HF England
Telephone +44 (0) 114 244 7051 Fax +44 (0) 114 242 5462 E-mail: [email protected]