Cetacea Sound Clear Voice System II Owner's Manual - Manual (Page 9)

Page 9
CVS - Use of Controls and Connections (cont.)
Connection Option D: (See Figure 4)
Connecting multiple wireless PAS units to multiple receivers:
1) Connect each PAS to its own receiver as described in Connection Option A, page 6.
2) You can only use one transmitter with this option.
3) Set the transmitter to F1 or F2. Set both receivers to the same frequency, F1 or F2, depending on which you selected for the
transmitter.
(Continued on page 10)
Fig. 4
(Continued from page 8)