Cvs - use of controls and connections (cont.) – Cetacea Sound Clear Voice System II Owner's Manual User Manual
Page 7

CVS - Use of Controls and Connections (cont.)
Connection Option B: (See Figure 2)
Connecting the receiver to a computer using the “line” input:
1)
The Clear Voice receiver has a line level output jack.
2)
Plug one end of the coiled patch cable into the line level
output jack of the CVS receiver and the other end into the line
input jack of your computer.
3)
Plug the input wire of the PAS speaker into the headphone or
line output jack of your computer.
4)
Adjust your computer sound card mixer to use this option.
See the computer owner’s manual for further details.
Fig. 2
(Continued on page 8)
(Continued from page 6)
Page 7