D-Link DES-5016 - Manual (Page 46)

Fast Ethernet Switching System User’s Guide
Managing the DES-5016
38
Console Program
The Console Program, shown in Figure 20, is the main menu of the DES-5016.
Figure 20: Console Program
System Configuration
The System Configuration menu gives you general information about the DES-5016 and
allows you to assign a LAN IP Address, Subnet Mask, LAN Default Gateway and contact
information on the system administrator.
User Account Management
The User Account Management menu allows you to add users, delete users and modify
user account information.
Switch Port 1-8, 9-16 and Optional Module Configuration
Switch Port 1-8 and 9-16 Configuration allows you to configure individual ports. You
can set the speed, duplex mode, enable and disable ports and make other changes. The
panels you see may be different, depending on the modules you have installed.
100BASE-FX/ 1000BASE-SX Switch Port Module
Allows you to configure the ports on the expansion module. You can set the duplex
mode, for the 100BASE-FX module, and enable and disable ports.