Caple CM107 - Manual (Page 23)

EN 4/USING YOUR APPLIANCE
23
The fan heat function allows you to cook and brown foods like in a traditional oven.
Programming the FAN HEAT function Display
Turn the selector to choose the FAN HEAT function.
The corresponding display lights up; the temperature
(200°C) flashes in the display.
Press the +/- touch controls to choose the
programme temperature, e.g. 180° C. Confirm the
temperature by pressing START/STOP.
The clock’s digits start flashing in the display.
Press the +/- touch controls to adjust the programme
time, e.g. 40 minutes.
Confirm the selection by pressing START/STOP.
The oven turns on and the programme begins.
Comments :
The duration may be adjusted at any time by simply pressing the +/- touch controls.
“°C” flashes until the programme temperature is reached .
You can preheat your microwave oven for fan heat programmes just as you would a
traditional oven.
Please note :
Never preheat your oven in the Fan Heat + Microwave mode because this could
damage the appliance.
Recommendations :
The cooking temperature can be adjusted in increments of 10°C, from 50°C to 250°C.
The cooking time ranges from 0 to 90 minutes.
It is preferable to enter a minimum time and then to add time if necessary; monitor the
colour of foods.
Always insert the grid at level 1 or level 2; this will optimise heat distribution and the
quality of the cooking.
Use cookware designed to be heat-resistant.
Protect your hands when you remove the dish because the cookware may reach high
temperatures.
If you want to defrost food after using the fan heat function, we recommend that you let
your oven cool down for 10 minutes; this will give you better results.
•FAN HEAT FUNCTION
200
°C
00:00
180
°C
40:00