Caple CM107 - Manual (Page 14)

EN 4/USING YOUR APPLIANCE
Programming by power level Display
Turn the function selector to choose the variable power
microwave function. The maximum power level, 1000 W,
flashes in the display.
Press the +/- touch controls to reduce the power of the
microwave oven, e.g. 500 W. Confirm the power level by
pressing START/STOP; the clock’s digits begin
flashing in the display.
Press the +/- touch controls to adjust the programme
time, e.g. 10 minutes.
Confirm the selection by pressing START/STOP. The
oven turns on and the programme begins.
Comments :
If the door is opened during cooking, the oven stops and the remaining time flashes in the
display. To continue the programme, simply close the door and press START/STOP.
The duration can be adjusted at any time by simply pressing the + / - touch controls.
•EXPRESS MICROWAVE PROGRAMME
Express programming Display
Turn the function selector to the stop position, then
press the START/STOP touch control for one second to
enter an express programme time of 15 seconds.
The microwave operates at its maximum power level
(1000 W). The oven turns on and the programme begins.
You can enter an express program ranging up to 2 min
30 s. Up to one minute, each time you press
START/STOP adds 15 seconds to the programme.
After that, 30 seconds are added until the maximum
time of 2 min 30 s is reached.
Comments :
After starting the programme, you can modify its duration by
pressing the + / - touch controls up to 2 min 30 s.
1000W Direct programming Display
Turn the function selector to choose the maximum
power microwave function. The microwave display
lights up; 1000 W appears in the display.
The clock’s digits start flashing in the display.
Press the +/- touch controls to adjust the programme
time, e.g. 10 minutes.
Confirm the selection by pressing START/STOP. The
oven turns on and the programme begins.
•MICROWAVE FUNCTION
00:00
1000 w
00:00
10:00
1000
w
10:00
500
w
00:15
02:30
14