Backguard, Adjustable feet – Caple CR7200 User Manual
Page 7
7
Backguard
Before installing the cooker, assemble the backguard “C” (fig. 2.3).
■
Before assembling remove any protective film/adhesive tape.
■
Remove the two spacers “A” and the screw “B” from the rear of the cooktop.
■
Assemble the backguard as shown in figure 2.3 and fix it by screwing the central
screw “B” and the spacers “A”.
It is mandatory to install the backguard.
A
B
C
Adjustable feet
■
Before installing the cooker level the appliance by screwing or unscrewing the six
adjustable feet fitted below.
WARNING!
For safety reasons unscrew
the feet (from screwed posi-
tion) to the maximum extent of
5 mm (fig. 2.2).
Fig. 2.2
Fig. 2.3