Caple CR7200 - Manual (Page 27)

27
SETTING TIME OF DAY
(fig. 7.2)
The programmer is provided with an electronic clock
with luminous figures showing the hour and minutes.
The first time the oven is connected up to the electricity
supply and after a power cut, three zeroes will flash on
the programmer display.
To adjust the time, the two buttons
must be
pressed simultaneously and then the button or
until the correct time is set.
Setting speed automatically increases if you keep the
setting buttons pressed.
MANUAL OPERATION
To use the oven manually, i.e. without the programmer,
you must cancel the flashing A by pressing the two but-
tons
simultaneously (the letter A will go out and
the symbol will come on).
CANCELLING A PROGRAMME
If the letter A is not flashing (which means that a cooking
program has already been set) by pressing the two
buttons
simultaneously you will cancel the
program and switch to manual.
If the oven is on, you must switch it off manually.
Fig. 7.2
Fig. 7.3