Caple CR7200 - Manual (Page 29)

29
SEMI-AUTOMATIC COOKING
This automatically switches the oven off after the required
cooking time. There are two methods of semi-automatic
cooking:
1° METHOD: Programming the cooking time (Fig. 7.6)
– Set the cooking time by pressing button and then
button to move forward or to move
back if you have gone beyond the required time.
The letter A and the symbol will appear.
2° METHOD: Programming the end of cooking
time (Fig. 7.7)
– Set the end of cooking time by pressing button and
then button to move forward or to move back if
you have gone beyond the required time.
The letter A and the symbol will appear.
Having programmed according to one of the above meth-
ods, set the temperature and function via the function
selector and thermostat knob (see specific chapters).
The oven will come on immediately and when the set time
or programmed end of cooking time expires, it will automat-
ically switch off.
During cooking the letter A and the symbol
remains on;
press button to display the remaining time until end of
cooking or press button to display the end of cooking
time.
The cooking program can be cancelled at any time by
pressing the two buttons
simultaneously.
At the end of cooking, the oven switch off, the symbol
go out, the letter A flash and the acoustic signal come on -
this can be switched off by pressing any of the buttons.
Reset the function selector and thermostat knob and set
the programmer to manual by pressing the two buttons
simultaneously.
A
A
Fig. 7.6
Fig. 7.7