Caple CR7200 - Manual (Page 26)

26
The electronic programmer is a device with the following functions:
■ 24 hours clock with illuminated display
■ Timer (up to 23 hours and 59 minutes)
■ Program for automatic oven cooking
■ Program for semi-automatic oven cooking
7 - Electronic programmer
(Bottom main oven only)
Fig. 7.1
A
Description of the buttons:
Timer
Cooking time
End of cooking time
simultaneously: Switching to manual and program reset
Minus function to decrease the number shown on the display or to change the
buzzer frequency
Plus function to increase the number shown on the display
Description of the illuminated symbols:
A flashing: Programmer in automatic position but not programmed
A always illuminated: Programmer in automatic position with program inserted.
Automatic cooking taking place
Timer in operation
and A flashing: Program error.
(The time of day lies between the calculated cooking start and end time).
Note:
Select a function by pressing the respective button and, in 5 seconds, set the required
time with the
/ buttons (“one-hand” operation).
A power cut makes the clock go to zero and cancels the set programs.