Caple CR7200 - Manual (Page 36)

36
Removing the bottom oven
door
The oven door can easily be removed as
follows:
– Open the door.
– Unscrew the 4 screws of the bottom
hinge (fig. 8.10)
– Hold the door and unscrew the 3
screws of the upper hinge (fig. 8.9).
– Remove the door following the arrow C
(fig. 8.9 - 8.10)
– Rest the door on a soft surface.
– To replace the door, repeat the above
steps in reverse order.
c
c
1
2
Replacing the ovens light
Before any maintenance is started
involving electrical parts of the appliance,
it must be disconnected from the power
supply.
– Let the oven cavity and the heating
elements cool down;
– Switch off the electrical supply;
– Unscrew the protective cover (fig. 8.8);
– Unscrew and replace the bulb with a
new one suitable for high temperatures
(300°C) having the following specifica-
tions: 230 V
50 Hz, 15W, E14
– Refit the protective cover
NOTE: Oven bulb replacement is not
covered by your guarantee
Fig. 8.8
Fig. 8.9
Fig. 8.10