Burners – Caple CR7200 User Manual
Page 34
34
Burners
They can be removed and washed only with soapy water.
Detergents can be used but must not be abrasive or corrosive.
Do not use abrasive sponges or pads.
Do not put in dishwasher.
After each cleaning, make sure that the burner-caps, as well as the burners, have been
well wiped off and CORRECTLY POSITIONED.
It is essential to check that the burner flame distributor “F” and the cap “C” has been cor-
rectly positioned (see fig. 8.3-8.4) - failure to do so can cause serious problems.
Check that the electrode “S” (fig. 8.3) is always clean to ensure trouble-free sparking.
Note:
The electrode “S” must be very carefully cleaned.
To avoid damage to the electric ignition do not use it when the burners are not in place.
Fig. 8.3
S
F
C
Fig. 8.4