Caple CM400FA - Manual (Page 26)

This function makes it possible to remove
incorrect functioning data and to reinstate the
Standard Programming settings (see PRESET
SETTINGS chart).
Proceed as follows:
• Release voltage by turning the main switch
off (OFF).
• Reinstate voltage by turning the main switch
on (ON) and simultaneously pressing down
on the keys ENTER and RESET;
until the display reads:
56
UK
This function allows you to reset the total
amount of water used.
Proceed as follows:
• Release voltage by turning the main switch
off (OFF).
• Reinstate voltage by turning the main switch
on (ON) and pressing down on the key:
until the display reads:
This function makes it possible to reset the total
number of washing cycles.
Proceed as follows:
• Release voltage by turning the main switch
off (OFF).
• Reinstate voltage by turning the main switch
on (ON) and pressing down on the key:
until the display reads:
9.
SPECIAL MACHINE SCALING FUNCTIONS
9.1
RESETTING THE
CLEANING FILTER
LITRE COUNTER
9.2 RESETTING WASHING
CYCLES
9.3 RESETTING MACHINE
PARAMETRES
+
SCM5
This function makes it possible to activate the
motor manually forming the automation of the
manual coffee delivery group. Proceed as fol-
lows:
• Release voltage by turning the main switch
off (OFF).
• Reinstate voltage by turning the main switch
on (ON) and simultaneously pressing down
until the display reads:
IMPORTANT: When the machine is switched
on, since the arrow key 4 is
used to access this site, the
piston will automatically start
to move downwards.
• Press the arrow key 4 to move the piston
DOWNWARDS.
• Press the arrow key 2 to move the piston
UPWARDS.
• Release and reinstate voltage using the
main switch to end the procedure.
9.4 HANDLING MANUAL
COFFEE DELIVERY
GROUP
+
SCM5_UK_Rev_2.qxp 23/01/2008 15.59 Pagina 56