Caple CM400FA User Manual
Page 15
45
UK
6.
ADJUSTMENTS TO BE MADE BY A QUALI-
FIED TECHNICIAN ONLY
6.1
GRINDING
ADJUSTMENT
CAUTION
Always remove the drip compartment
before opening the outer door!
Always close the outer door and push the
drip compartment all the way in! Otherwise
the door and hinges could become dam-
aged!
Open the outer door and then the inside one:
Use the Allen wrench (supplied) on the relevant
screw:
• turn clockwise for finer grinding or thicker
coffee;
• turn anticlockwise for coarser grinding or
more liquid coffee.
Close the doors after making these adjust-
ments.
• Classification of the control device accord-
ing to protection against electrical shocks:
incorporated into Class I equipment.
• Control device pollution levels: suitable for
use in ordinary or normal pollution environ-
ments.
• Category (Immunity against excess voltage)
CATEGORY I.
• Class and structure of software CLASS A.
• Control unit printed circuit: 100x180 mm.
The card is built for use in temperature ranges
as indicated in the electrical characteristics.
Operation at temperatures over these levels is
not foreseen for the logic components in the
control unit and can therefore lead to malfunc-
tioning.
Operation at voltages outside this range cannot
be guaranteed.
SCM5
SCM5_UK_Rev_2.qxp 23/01/2008 15.58 Pagina 45