Caple CM400FA - Manual (Page 20)

50
UK
• Shut the door again
• The display will read:
The infusion group will then be positioned in
standby and the display will read as follows:
ENTER key: used to enter menus
and/or to confirm val-
ues and pass on to the
next step.
CURSOR keys: used to scroll
through the menus
and to increase /
decrease value set-
tings.
RESET key: used to confirm and to
return to the previous
step.
1
3
2
4
8.
PROGRAMMING
8.1 LEGENDA
NOTE: Can be performed with machine on.
To enter the programming mode, proceed as
follows:
• Partly remove the machine from its housing.
• Open the front door using the relevant but-
ton on the left-hand side of the machine.
• The display will read as follows:
Press the ENTER key.
8.2 PROGRAMMING
4 3 2 1
LIST OF PROGRAMMABLE
FUNCTIONS
1. TOT. COUNT
2. PRODUCT NAME
3. COFFEE DOSE PROGRAMMING
4. GRINDING TIME
5. PREINFUSION
6. TAMPING
7. GROUNDS NUMBER
8. CLEAN ALARM
9. GROUP SETTING 1
9. GROUP SETTING 2
10. GRINDER SETTING
11. STEAM TEMP.
12. WATER FILTER L
This operation may ONLY be per-
formed by a Specialist Technician.
Adjustments made by Unqualified
Technicians or other people may ren-
der the Guarantee null and void.
SCM5
SCM5_UK_Rev_2.qxp 23/01/2008 15.59 Pagina 50