Caple CM400FA - Manual (Page 21)

51
UK
To quit the programming mode, it is sufficient to
open the door and close it again.
• The display will read:
8.3 EXITING
PROGRAMMING
8.4 PROGRAMMING CYCLE
SCM5
1. LANGUAGE
Press the ENTER key to access the submenu.
This sets the language for operator-machine
interface, as shown on the display.
Press the 2 e 4 keys to select the required lan-
guage.
The possible languages are as follows:
Italian, English, Spanish, German, French,
Dutch, Swedish, Danish, Finnish, Norwegian,
Russian and Japanese.
Press the RESET key to quit the submenu and
return to the main menu, confirming the new
setting.
2. CUMULATIVE TOTAL
The submenus can be entered by push-
ing the ENTER key.
The quantity of doses delivered for each
kind of beverage will be displayed.
1 Total Ristretto
2 Total 2 Ristretto
3 Total Espresso
4 Total 2 Espresso
5 Total Cafee
6 Total 2 Cafee
7 Total Cafecream
8 Tot. Deca
9 Tot. Cleaning
10 Tot. Litres
Press the keys to scroll through the var-
ious totals relevant to all beverages.
Hold down the
key to view the total number
of doses dispensed by the machine.
In order to annul the counts, to press keys
at the same time.
The display will read as follows: “COUNTERS
RESET”.
The RESET key returns to the previous menu.
3. PRODUCT NAME:
A beverage name is assigned to each single
key (no. indicates the number of the rele-
vant key.) The names are pre-set in the fac-
tory but it is possible to change them to suit
personal requirements. The individual set-
ting will override the preset ones and influ-
ence all subsequent programming proce-
dures.
Example:
In this case the beverage ‘Espresso’ is
assigned to key number 1.
The arrow keys 2 and 4 scroll the names of the
beverages on each key available in the agenda.
The RESET key is for exiting the submenu.
4. WATER VOLUME CC
By pressing the ENTER key the sub-
menus can be accessed.
The doses of water to be used for each
single drink can be programmed.
1
Water volume cc Ristretto
2 Water volume cc 2 Ristretto
3 Water volume cc Espresso
4 Water volume cc 2 Espresso
5 Water volume cc Coffee
6 Water volume cc 2 Coffee
7 Water volume cc CoffeCreme
12 Water volume sec Tea
Keys increase / reduce the amount of
water used to prepare the relevant beverage,
Press the RESET key to exit the submenu and
go back to the main menu and to confirm the
dose programming.
Press the ENTER key to scroll all the items on
the submenu and see confirmation of the dose
programmed.
The ENTER key confirms the type of beverage
for the key number being taken into considera-
tion, and then passes on to the beverage of the
next key.
The programmable keys are the following:
Once the programming of the final key has been
completed, you pass on to the next menu item.
NOTE: The keys can be programmed for milk-
based drinks and coffee. Keys 1 2 3
can only be programmed for coffee
drinks, while keys 4 6 and 8 can be
configured as coffee or milk-based
drinks.
1 3 2 4 6
SCM5_UK_Rev_2.qxp 23/01/2008 15.59 Pagina 51