BUG-O Systems BGW-5000 - Manual (Page 37)

37
1. SEW motors
and reducer:
Refer to SEW
operating
instruction
manuals for
detail
2. drive wheel:
Bearing
3. Cross slide
lead screw,
bearing
4. rotary wheel:
bearing
5. Guide Wheel
Ass: lead
screw, bearing
6. Vertical slide:
lead screw,
bearing
Schematic diagram of the lubrication points
7.3 The serrated flanged drive wheel would need to be replaced if it is worn and loses the necessary grip to
keep the Girth welder travel steadily on the tank shells.
7.4 Check the flux recovery system
Clean the flux hopper filter every day and replace the filter every two weeks