BUG-O Systems CB-1P - Manual (Page 10)

10
CWO-3951 PLASMA CONTROLS
ARC ON/OFF
HAND/OFF/AUTO
ARC ON/OFF:
The OFF position disables the cutting process, allowing machine rotation without starting the cutting process
when the HAND/OFF/AUTO switch is thrown to the HAND position. The ON position enables the cutting
process when the HAND/OFF/AUTO switch is thrown to the AUTO position.
HAND/OFF/AUTO:
The HAND position allows the operator to rotate the machine when the ARC ON/OFF switch is in the OFF
position to check torch position as well as the cam setting. The AUTO position will start the entire cutting
operation based on the operator’s settings including machine rotation when the ARC ON/OFF switch is in
the ON position. The OFF position will stop the entire cutting process including machine rotation.