Bronkhorst E-7000 - Manual (Page 14)

BRONKHORST HIGH-TECH B.V.
page 14 9.17.004
1.5.2 EMC and housing
All electronic circuits and modules have been designed to meet the requirements needed to carry the
CE-mark.
However compliance with the (EMC) requirements is not possible without the use of properly
screened housings.
1.5.3 Electrical specifications
Input: see model configuration for input voltage
Supply voltage: 100 ... 240 Vac
: 50 ... 60 Hz
220 ... 240 Vac : 50 ... 60 Hz
110 ... 120 Vac : 50 ... 60 Hz
24 Vac : ± 5 %/50 ... 60 Hz
24 Vdc : ± 5 %
Outputs of one power supply:
Mains powered and : + 15 Vdc/2A
24 Vac/dc powered - 15 Vdc/0,5A
+ 5 Vdc/1A nominal 30W
Temperature
Operating range : 0 ... + 50°C
Storage range : - 20 ... + 60°C
Fuse
: consult system label
Note :
Never block ventilation holes.
Operation at high ambient temperatures over extended periods may lead to reduction of the operating
lifetime of your power supply / readout system