Broadata Communications 250E Series User Manual
Page 8

BCI 250E/260E User’s Manual
Broadcast Quality Video/Audio/Data Transport System
Broadata Technical Support, [email protected]
9
Figure 2-2
Video Connection
1.
Connect the required video transmission source to
the VIDEO 2 BNC connector on the 250E/260E
unit.
2.
Lastly, connect the VIDEO 1 BNC connector on
the 250E/260E unit to the required video receiver
unit(s). You are now ready to transmit and receive
video signals.
2.2.1.2 Audio Interface
For the audio portion, observe the following steps.
(See Figure 2-3).
Figure 2-3
Audio Connection
This manual is related to the following products: