Broadata Communications 250E Series - Manual (Page 15)

BCI 250E/260E User’s Manual
Broadcast Quality Video/Audio/Data Transport System
Broadata Technical Support, (800) 214-0222 16
2.4 AC Power Connection
Congratulations! You are now ready to power up the BCI 250E/260E
and set up your network connection. In order to make sure that you
have a proper installation, please observe the following:
1. Your AC jack has power.
2. Your electrical system has proper grounding (this ensures
that your power supply does not suffer from voltage
variations).
3. Power Surge Protection. This is optional, but highly
recommended. A UPS system provides voltage regularity
as well as prevents spikes from occurring, thus protecting
your 250E/260E from sensitive voltage conditions.
The 250E/260E derives power from an internal power supply. This power
supply is a 95-240 VAC, 50-60 Hz, at 0.8A. This power supply comes
standard for the 250E/260E unless otherwise specified.
To provide power to the 250E/260E, simply connect the power cord,
already provided with the units, and connect it to the wall jack. (You will
find one power cord per unit). Once the power cord has been connected
to the wall jack, connect the other end of the cord and turn the switch
on (I).
If you have any problems or concerns, regarding the installation, make
sure that you have taken the proper steps to ensure a proper power
connection. Otherwise, feel free to contact us for any questions you
may have.
3.0 OPERATION
After the installation procedure is completed, the units are ready for
operation. To operate the BCI 250E/260E units, simply apply power as
indicated in the previous step. Note that the following front panel link
status indicator, shown in Table 2(a) and Table 2(b), will be activated.