0 setup – Broadata Communications 250E Series User Manual
Page 6

BCI 250E/260E User’s Manual
Broadcast Quality Video/Audio/Data Transport System
Broadata Technical Support, [email protected]
7
2.0 SETUP
The BCI 250E/260E Series units are used in pairs. For unidirectional
applications, the 250E transmitter is located at the near-end, while a
250E receiver is connected at the far-end through one fiber. For
bi-directional applications, one 260E transceiver unit is located at the
near-end and connected through two optical fibers to an identical 260E
transceiver located at the far-end of the link. Each unit provides a separate
electrical interface connector for the audio, video, and data signals.
Connections are one to one between both units. Figure 2-1 depicts a
typical installation.
Figure 2-1
250E Setup
This manual is related to the following products: