Dixon 8000G Series - Manual (Page 15)

15
PARKING BRAKE:
A parking brake is located to the left of the seat.
The engine will kill if control levers are not in the outboard position
when the parking brake is engaged.
To engage brake: pull up and back
To disengage brake: push forward and down
Note: The parking brake is not intended to be used as a service
brake.
Note: Always set parking brake before dismounting. Release the
parking brake before moving mower.
Note: Engage parking brake before starting engine.
MOWER DECK LIFT:
The mower lift lever is extra long & has an assist spring for easy
operation.
1) Grasp lever with right hand.
2) Depress thumb lever to release. Move to desired position.
3) Release lever to lock into position.
Select cut height & insert pin into first hole below the lift lever. Ten
holes are provided for a down stop so you can easily return from`
transport to desired cut height.
CONTROLS