Bolide SVR9000s MO - Manual (Page 6)

User Manual
3
Chapter 2 Appearance
2.1 Front Panel
1. Retractable HDD Box
2. Retractable HDD Box Key / Power on/off
3. USB 2.0 Port
4. Indicator
a. PWR Indicator: light on when power is on
b. HDD Indicator: light on when HDD is available; light flash when HDD is writing data.
c. REC Indicator: light on when recording is in progress
d. SD Card Indicator: light on when SD card is reading/writing data
e. VLOSS Indicator: light on when video loss is triggered.
f. GPS Indicator: light on when installing GPS mould and have no received GPS signal and light flash
when received GPS signal
g. ALM Indicator: light on when any alarm is triggered.
h. Net Indicator: light on when wireless Net is installed and on the status of working
i. ERR Indicator: light on when error occurs
j. HEAT Indicator: light on when heat mould is working (Optional)
5. IR Receiver
6. UIM Card Port: it is available only when the corresponding Net mould is installed.
7. SD Card Port
MCU port: used to upgrade MCU of main board
DEBUG Port: used to debug the main unit.
1 2
3 4 5 6 7