beautypg.com

User manual – Bolide SVR9000s MO User Manual

Page 19

background image

User Manual

16

Prev: go to the previous ones of current page. Clicking [Pre] button will take you back the previous ones of

current page (except the first page).

Next: go to the next ones of current page. Clicking the [Next] button will take you to the next ones of

current page (except the last page).

Last: go to the last page. Clicking the [last] button will make you enter into last page quickly.
All: allows you select all the recording events on the current page.
Inverse: allows you select other recording events on the current page except those you have selected

currently

When backup processing ends, system will prompt you “Backup success!” shown as Picture 5-14

2、 Please make sure you have connected backup device well before backing-up.
5.3.5 Device Management

5.3.5.1 HDD Management

In the [Device Management] screen, click [SEL] to enter into the below window shown as Picture 5-16.

HDD Alarm – If set to “Reboot”, the DVR will auto reboot after two minutes when system have detected

current HDD is not properly installed or not formatted; if set to IGNORE, the DVR will cancel the

HDD Status (status of the currently installed hard drive) –If the hard is

not installed properly you will see a message saying NO DISK

FOUND.

Total space-Total size of the hard drive currently installed.

Free space-Total free space available on the hard drive installed.

Useable Rec. Time-Free space currently available in hours

Picture5-13

In the [File List] mode, if you wish to backup recordings,

please tick-select the BAK check-boxes which correspond

to the recordings and click [Backup] button

Note:

1、

Backup file will be saved as H264 format; you can

convert it to AVI format using the Multimedia Player program that

comes with the DVR or through the net-viewer program, so you

can use any player which supports AVI format.

Picture5-16

Picture5-14

Picture5-15

[Device management] object includes HDD, Alarm, Motion, Vehicle

and PTZ.Click [Main Menu

Device Management] to enter into the

interface shown as Picture 5-15.