Bluelab Dosetronic Peridoser Kit - Manual (Page 22)

18
Version P1.3 : 151012
Bluelab Dosetr
onic P
eridoser Kit
Bluelab Corporation Limited
3.2 Monitor only mode
Monitor mode shows only the readings
from your conductivity, temperature and
pH probes. No control action
occurs.
Press mode up and down keys to select.
Alarm Function
To turn the alarm on or off press this
key. If it is activated the indicator next to
the button will be lit. It can be changed
during any mode.
2.7
23
6.3
External lockout
This indicator is lit whenever a
“lockout” condition is sensed through
the alarm box. If sensed, all control
activity will be stopped. If the alarm
box is plugged in and sensors
connected (see Page 13 & 15).
Brightness Control
1. Press and hold down the
brightness button.
2. Adjust brightness using
increase/decrease buttons.
This can be done at any time.
br 8
8.8.8.8.
2
1
33