7 probe connection and placement – Bluelab Dosetronic Peridoser Kit User Manual
Page 15

11
Version P1.3 : 151012
Bluelab Dosetr
onic P
eridoser Kit
Bluelab Corporation Limited
Bluelab Corporation Limited
Power Input
Temperature
Power In
Temperature
Power Out
DC INPUT: 5V --- 3A
M
anu
factured in New Zealand b
y:
Bluelab Corporation Limite
d
8 Whiore
A
ve
Tau
rik
o In
dus
tri
al P
ar
k
Ta
uran
ga 314
0
N
ew Z
ea
la
nd
Conductivity
pH
Temperature
2.7 Probe connection and placement
pH and pH ATC
The pH probe provided has automatic
temperature compensation (ATC). It
connects to two separate sockets. The
sockets are labelled are pH and pH ATC.
Together they provide a temperature
compensated reading that is more
accurate than a standard pH probe.
Note: A standard pH probe with a BNC plug can
be used on its own with the Dosetronic but pH
readings will not be temperature compensated.
Conductivity Probe
This socket connects to the conductivity
probe that attaches to a “T” fi tting coming
off the inlet pipe on the sample pot.
Temperature Probe
This socket connects to the temperature
probe that can read air temperature or be
submerged in the sample pot to read the
solution temperature.
Temperature
Conductivity
pH
pH ATC
2