D-Link DI-624M - Manual (Page 68)

68
DI-624M User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
Step 3: Click on Apply and then click Continue to save the changes.
Step 4: Click the Status tab and click the Device Info button. Your IP Address information
will be displayed under the WAN heading.
3 How can I setup my router to work with Earthlink
DSL or any PPPoE connection?
Make sure you disable or uninstall any PPPoE software such as WinPoet or Enternet
300 from your computer or you will not be able to connect to the Internet.
Step 1: Upgrade Firmware if needed.
(Please visit the D-Link tech support website at: http://support.dlink.com for the latest
firmware upgrade information.)
Step 2: Take a paperclip and perform a hard reset. With the unit on, use a paperclip
and hold down the reset button on the back of the unit for 10 seconds. Release it and
the router will recycle, the lights will blink, and then stabilize.