D-Link DI-624M - Manual (Page 20)

20
DI-624M User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Choose this option if your ISP uses PPPoE. (Most DSL users
will select this option.)
Dynamic PPPoE: Receive an IP Address automatically from
your ISP.
Static PPPoE: You have an assigned (static) IP Address.
Your PPPoE username provided by your ISP.
Re-enter the PPPoE password.
Enter the Service Name provided by your ISP (optional).
This option is only available for Static PPPoE. Enter the static
IP Address for the PPPoE connection.
Primary DNS IP address provided by our ISP.
This option is only available for Static PPPoE. Enter the static
IP Address for the PPPoE connection.
Maximum Transmission Unit-1492 is the default setting-you
may need to change the MTU for optimal performance with your
specific ISP.
If enabled, the DI-624M will automatically connect to your ISP
after your system is restarted or if the PPPoE connection is
dropped.
PPPoE:
User Name:
Retype Password:
Service Name:
IP Address:
Primary DNS
Address:
Secondary DNS
Address:
MTU:
Auto-reconnect: