D-Link DI-624M - Manual (Page 33)

33
DI-624M User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Performance
Auto is the default selection. Select from the drop down menu.
100% is the default selection. Select from the drop down menu.
Beacons are packets sent by an Access Point to synchronize a
wireless network. Specify a value. 100 is the default setting
and is recommended.
This value should remain at its default setting of 2432. If
inconsistent data flow is a problem, only a minor modification
should be made.
The fragmentation threshold, which is specified in bytes,
determines whether packets will be fragmented. Packets
exceeding the 2346 byte setting will be fragmented before
transmission. 2346 is the default setting.
Advanced > Performance
TX Rate:
Transmit Power:
RTS Threshold:
Beacon Interval:
Fragmentation:
Note: These features will be available in future firmware releases.