Belshaw Adamatic TG50 Thermoglaze - Manual (Page 14)

Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425
8 MN-1720 Thermoglaze 50
SB-0345 Rev 1
AFFECTS: TG-50
PURPOSE: PROGRAMMING THE OGDEN ETR-9000 TEMPERATURE CONTROLLER
Operator Interface:
The operator interface on the Ogden ETR-9000, Temperature Controller, consists of the following:
• A scroll key used to select a parameter to be viewed or adjusted.
• Up and down arrow keys are used to increase or decrease the selected parameter.
• A reset key used to return to normal operation mode.
Figure 1 – Operator Interface Description
Menu Overview:
There are three main menus that contain parameters that require programming; they are User Menu,
Setup Menu, and Calibration Mode. The figure below (Figure 2) shows the sequence of operations
necessary to access the programming parameters in each menu.