Belshaw Adamatic Type B Donut Cutter User Manual
Page 32
Belshaw Bros., Inc.
• www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425
16
MN-1528EN
Type B Donut Cutter TS
#0400 HEIGHT ADJUSTMENT KIT
INSTALLATION INSTRUCTIONS
#0400 Kit consists of the following:
A. #0247 Thrust Washer
B. #0316 Outer Sleeve Assembly
C. #0246 Inner Sleeve
D. 5/16-18 X ½ Square Head Set Screw
1. Assembly the kit components, arm brackets, and #0121 set collar together as shown in the above
drawing.
2. With the cutter mounted in place on the pivot arm bracket, adjust the #0121 set collar to position
cutter at the proper height:
A. The guard flange of the hopper base when mounted on the machine should just clear the rim of the
fryer.
B. The bottom of the cutter should be 1” to 1 ¼” from the surface of the shortening.
3. Raise the height adjustment assembly (A, B, C and D) to achieve a distance of 1 3/8” between the
Bottom of “C” and the arm bracket. Tighten set screw “D”.
SB-88