Belshaw Adamatic Type B Donut Cutter - Manual (Page 21)

Belshaw Bros., Inc. • www.belshaw.com • Phone 206-322-5474 • Fax 206-322-5425
Type B Donut Cutter TS MN-1528EN 5
3 Troubleshooting
This section is designed as an aid in
troubleshooting. It does not cover every possible
problem that might arise, and it is not a substitute
for a qualified technician.
To use the following chart: look in the first
column to find the section dealing with the
problem. In the middle column you will find one
or most possible causes. The other column has
possible solutions. To avoid unnecessary
repairs, be sure to isolate the correct cause of the
problem before taking corrective action.
FACTORY PARTS AND REPAIR
SERVICE
Replacement Pert Orders (Include the
following information with your order):
1. Model name and number of your machine.
2. Serial number of your machine
3. Voltage, phase, and hertz (if applicable).
4. Part number, part name, description, size (if
applicable), etc.
5. Quantity desired
Factory Rebuild Service
If your machine becomes badly worn or
seriously out of adjustment, we have a complete
rebuild and repair service. Call the service
department for a Return of Goods Authorization
number (R.G.A. #). Return your machine to the
factory (with the R.G.A. # on the outside of the
box, and on the paperwork inside), FREIGHT
PREPAID, with your instructions, phone
number, and the name of the person to contact
when a cost estimate has been determined. In
most cases, the machine can be shipped back,
freight collect, within five days.
Ship to:
Belshaw Bros., Inc.
814 44
th Street NW, Suite 103
Auburn, WA 98001 USA
Phone: (206) 322-5474
Fax: (206) 322-5425