Beisler 739-23-1 Program - Manual (Page 7)

4-7
1.4 Setting programmes (F3)
Press the F3 function key to call the setting programmes. The display
reads as follows:
Prior to executing the setting programmes, the sewing axes must be
referenced.
–
Press the “OK” key.
The reference run is carried out.
– Use the keys “ ” and “ ” to select the required setting
programme.
– Press the “OK” key.
The setting programme is started.
The first digits show the activated menu function, while the last three
digits indicate the selected function.
1.4.1 List of setting programmes
Number Name
301 Measuring of transponder reading position
302 Measuring of needle position
303 Measuring of edge cutter zero position
304 Display of DA counter
305 Display of error memory