Beisler 739-23-1 Program - Manual (Page 22)

4-22
1.7.6 Setting of final bartack
With this parameter, the final bartack for the contour to be sewed can
be defined.
The first digit of the display indicates the type of final bartack, while the
second digit indicates the number of stitches in the tack.
Tack type: 1 = Single tack
2 = Double tack
Number of stitches 0 to 20 stitches
Example: Tack type = 1, number of stitches = 6
Note
If the tack type is set to “0", the machine sews according to the tack
settings of the transponders.
Operating steps
–
Select menu with the “ ” or “ ” key.
– Press the “OK” key.
– Set the desired tack type with the “1" or ”2" key.
– Set the desired number of stitches in the tack with the “
á” or “â”
key.
– Press the “OK” key.
The set values are transferred to the control system.
or
–
Press the “ESC” key.
The changes are cancelled.