Beisler 739-23-1 Program - Manual (Page 23)

4-23
1.7.7 Setting of initial stitch condensation
With this parameter, the initial stitch condensation for the contour to be
sewed can be defined.
The first digit of the display indicates the number of stitches, while the
last digits in the display indicate the stitch length for the stitch
condensation.
Number of stitches 0 to 20 stitches
Stitch length 0.5 mm to 2.3 mm in 8 steps
Example: Number of stitches = 5, stitch length = 0.5 mm
Note
If the stitch length is set to “0", the machine sews according to the
stitch condensation settings of the transponders.
Operating steps
–
Select menu with the “ ” or “ ” key.
– Press the “OK” key.
– Set the desired number of stitches with the “ á” or “â” key.
– Set the desired stitch length with keys “1" to ”8".
– Press the “OK” key.
The set values are transferred to the control system.
or
–
Press the “ESC” key.
The changes are cancelled.