Beisler 1282-4 - Manual (Page 74)

- 18 -
Closing Seam Machine 1282-4 Working Instructions Beisler Automated Sewing Equipment
D.3
Programming
4. Change value:
• Press the or key.
or enter a two-digit or three-digit value using the numeric keypad. Input
sequence: Hundreds digit, tens digit, units digit.
5. Confirm input menu:
• Press the key.
6. Exit menu and return to access level 2:
• Press the . key
7. Return to access level 1:
• Press the . key
The following basic parameters can be modified:
01 PHOTOCELL REACTION TIME
Delay between insertion process (photocell darkens) and beginning
of sewing
02 PHOTOCELL -> FOOT DOWN
Duration before pressure foot is lowered and chain cutting function
is activated (this setting depends on the sewing materiall)
03 FOOT DOWN -> SEWING
Duration during which top thread slackens before being retensioned
04 KETTUP DURATION AT BEGINNING
Duration of kettup aspiration after photocell has darkened at begin-
ning of seam, triple-thread machines require extended aspiration;
economy switch-off
05 POSTSEWING DISTANCE
Distance for postsewing stitches when the sewing piece is removed
manually from the sewing unit during the sewing process
06 KETTUP DURATION AT END
Duration of kettup aspiration after sewing end, economy switch-off
07 SEWING OFF -> FOOT UP
Time after sewing end before pressure foot is lifted
08 PC LOCKOUT TIME AT END
Delay before new sewing pieces is scanned and recognized (lock-
out time after photocell bright)