Start-up – Beisler 1282-4 User Manual

Page 35

Closing Seam Machine 1282-4 Working Instructions

- 6 -

Beisler Automated Sewing Equipment

C.3

Start-up

C.3.2 Compressed air connection

The compressed air connection is preinstalled on the
machine. It comprises the following components:
•

Fig. 3: Pressure reducer

with manometer

and water separator

•

Quick-disconnect coupling

for pressure hose.

The pressure reducer is mounted to the left rear leg of the
worktable.

Connecting the machine to the compressed air sup-
ply system:
1. Connect pressure hose plug to on-site terminal unit.
2. Open on-site compressed air supply.
3. Set pressure reducer to a machine operating pressure

of 6 bar by rotating pressure reducer knob

and read

value on manometer

• To increase pressure, rotate in clockwise direction,
• To reduce pressure, rotate in counter-clockwise

direction.

C.3.3 Sewing unit

Prior to connecting the machine to the power supply sy-
stem and performing a test run, the condition of the se-
wing unit must be checked.
•

Fig. 4: Retighten retaining screws

and

of the

sewing unit stitch plate.

Fig. 3 / 4

Fig. 3

Fig. 4