Beisler 1282-4 - Manual (Page 23)

Closing Seam Machine 1282-4 Working Instructions
- 14 -
Beisler Automated Sewing Equipment
B.3
Operation
Programs with one-digit program numbers (M01 - M09)
can be selected directly using the numeric keypad:
e.g. V = Program M06
To select two-dogit program numbers (M10-M20):
• Press the key
To select the number of the sewing program, e.g.10:
• Press the and keys
B.3.4 Manual sewing
The function "Manual sewing" is used for testing the se-
wing head and the sewing unit.
Request manual sewing by direct access:
• Press key.
8
The display shows the symbol for Manual seam:
9
Manual sewing is controlled using the footswitch.
Pressing the right side of the footswitch starts the sewing
process. The sewing speed can be controlled in twelve
stages, depending on the pressure exerted. The higher
the pressure, the higher the speed.
NOTE - Program reset!
After completion of a test, the sewing program must be
restarted by pressing the reset key at the operating pa-
nel.
B.3.5 Operating the stacker
The stacker can be operated manually independent of the
automatic machine cycle. If this function is enabled, the
stacker performs a stacking run.
Activate stacker manually by direct access:
• Press key.
7
B.3.6 Threading Fig. 14
This function is used for easy threading. The mechanical
system of the sewing unit is locked. The pressure foot is
lowered, the transport unit is raised.
Prepare the sewing unit for threading:
• Press key.
The display shows the symbol for Threading 1 next
to the description of the sewing program.
Fig. 14