Beisler 1220-4 - Manual (Page 42)

Operating manual Automatic single head serging unit 1220/4
Page 6-18 © Beisler GmbH, Hösbach
6.5 Short operating instructions for the
sewing head
ATTENTION
The short operating instructions provided here are an excert of the
complete operating manual of the sewing head. This operating
manual must be read completely and all instructions must be obeyed.
The Beisler GmbH takes no responsibility for the correctness of the
following.
6.5.1 Adjust height of needle pole
The distance between needle top and stitch plate should be 9,7 to 9,9
mm in the upper endpoint.
Pict. 12 Adjust height of needle pole (1)