Beisler 1220-4 - Manual (Page 40)

Operating manual Automatic single head serging unit 1220/4
Page 6-16 © Beisler GmbH, Hösbach
6.3.4.7 Copy single sewing programs into the machine control
Hint
Before program data can be copied into the control, the data of the
desired program location must be deleted before. This cannot be
undone.
1. Select the program page, where you want to copy the
program data to.
2. Press the Special-key.
3. Move the cursor on the letters ‚PRG‘.
4. Press the Plus-key twice to delete possible program data
stored on the selected memory location.
5. Move the cursor on the letter ‚R‘ (= read).
6. Plug the storage module into the slot on the right side of the
operating device.
7. Press the Plus-key to write the program data into the
machine control.
8. Press the Special-key to terminate the process.