Beisler 1220-4 - Manual (Page 23)

Chapter 5: Installation
Page 5-3
1. Connect the air pipe (A) to your air system.
2. Open the air supply of your air system.
3. Level the air pressure to 6 bar using the control (B); the air
pressure can be read at the scale (C).
ATTENTION
We recommend to switch off the air supply when the machine is not in
duty. Use the black control (B in Pict. 3).
5.2.3 Electrical installation
Hint
All work at the electrical components of the machine may only be
carried by qualified staff (qualified electrical employee or instructed
person according to IEC 364 and DIN EN 60204-1).
DANGER
Parts under electrical current! Without cutting off the power supply,
you might be injured severely. Please obey the security advice given in
chapter 1.
ATTENTION
The machine will be destroyed by connecting to a wrong mains
voltage! Check, whether the requirements from chapter ‘Technical
data‘ meet the local conditions.
1. Use the power cord located at the backside of the machine.
2. Plug it into a socket.
3. Lay the cord in a way, that the danger of stumbling is
avoided.