BECKHOFF FC520x - Manual (Page 23)

Eiserstraße 5 / D-33415 Verl / Telefon 05246/963-0 / Telefax 05246/963-149
FC520x / CX1500-x520 22
BECKHOFF FC520x / CX1500-x520
CX1500-x520
Address: Address of CX1500-x520
Search: Searches for all connected CX1500-x520 channels.
Upload Configuration: Scans the DeviceNet network and adds all found devices (boxes cannot be
added). In the case of Beckhoff boxes, reads the configuration precisely. Searches external devices to
find the corresponding EDS file.
Firmware: Shows the current firmware version of the CX1500-x520.
Firmware Update: Update the CX1500-x520 card firmware version here.
MAC-ID: Each DeviceNet device requires a unique station number – MAC-ID (Medium Access Identifier)-
including the master
Note:
With the CX1500-M520, the MAC-Id / Address is set within the TwinCAT System Manger
With the CX1500-B20, the MAC-Id / Address is set with the Address selector on the module
Baudrate: Set the DeviceNet Baudrate here. Select one of the following: 125kBaud, 250 kBaud and 500
kBaud
Cycle Time: Displays the cycle time of the corresponding highest priority task.
IO-Cycle Time: Sets the cycle time for the I0 connections. This value is used as the default value for
newly added boxes.
Heartbeat Time : not supported