Specifications, English, 20 specifications – Denon AVR-1603 User Manual
Page 29
29
ENGLISH
2
Audio section
• Power amplifier
Rated output:
Front:
70 W + 70 W
(8
Ω
/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
100 W + 100 W (6
Ω
/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
70 W
(8
Ω
/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
100 W
(6
Ω
/ohms, 1 kHz with 0.7 % T.H.D.)
Surround: 70 W + 70 W
(8
Ω
/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
100 W + 100 W (6
Ω
/ohms, 1 kHz with 0.7 % T.H.D.)
Output terminals:
Front:
A or B
1
6 to 16
Ω
/ohms
A + B
12 to 16
Ω
/ohms or more
Center/Surround:
1
6 to 16
Ω
/ohms
• Analog
LINE input - PRE OUT
Input sensitivity/input impedance: 200 mV/47 k
Ω
/kohms
Frequency response:
10 Hz ~ 100 kHz: +1, –3 dB (TONE DEFEAT
ON)
S/N ratio:
98 dB (IHF-A weighted) (TONE DEFEAT
ON)
2
Video section
• Standard video jacks
Input/output level and impedance:
1 V p-p, 75
Ω
/ohms
Frequency response:
5 Hz ~ 10 MHz — +1, –3 dB
• S-video jacks
Input/output level and impedance:
Y (brightness) signal — 1 Vp-p, 75
Ω
/ohms
C (color) signal — 0.286 Vp-p, 75
Ω
/ohms
Frequency response:
5 Hz ~ 10 MHz — +1, –3 dB
2
Tuner section
[FM] (note: µV at 75
Ω
/ohms, 0 dBf = 1 x 10
–15
W)
[AM]
Receiving range:
87.50 MHz ~ 108.00 MHz
522 kHz ~ 1611 kHz
Usable sensitivity:
1.0 µV (11.2 dBf)
18 µV
50 dB quieting sensitivity:
MONO
1.6 µV (15.3 dBf)
STEREO
23 µV (38.5 dBf)
S/N ratio:
MONO
80 dB (IHF-A weighted)
STEREO
75 dB (IHF-A weighted)
Total harmonic distortion:
MONO
0.15 % (1 kHz)
STEREO
0.3 % (1 kHz)
2
General
Power supply:
AC 230 V, 50 Hz
Power consumption:
210 W
Maximum external dimensions:
434 (W) x 147 (H) x 417 (D) mm
Mass:
10.4 kg
2
Remote control unit (RC-920)
Batteries:
R6P/AA Type (two batteries)
External dimensions:
55 (W) x 225 (H) x 34.5 (D) mm
Mass:
165 g (including batteries)
For purposes of improvement, specifications and design are subject to change without notice.
20 SPECIFICATIONS