BECKHOFF EL6930 - Manual (Page 23)

Operation
EL6930 21
4.1.4.2 Wiring
Up to eight connections enable the connection of solid or finely stranded cables to the Bus Terminals.
The terminals are implemented in spring force technology. Connect the cables as follows:
1. Open a spring-loaded terminal by slightly pushing with a screwdriver or a rod into the
square opening above the terminal.
2. The wire can now be inserted into the round terminal opening without any force.
3. The terminal closes automatically when the pressure is released, holding the wire safely
and permanently.
Wire cross section 0.08... 2.5 mm 2
Strip length 8 ...9 mm