BECKHOFF KL1501 - Manual (Page 8)

Terminal configuration
6 KL1501
Interbus Coupler BK4000
By default, the Interbus coupler BK4000 maps the KL1501 with 5 bytes of
input data and 5 bytes of output data.
Offset Termina1= 0
Offset Terminal2 Channel1 = 5
Offset Terminal2 Channel2 = 8
The control/status byte
must be inserted for
parameterization (KS2000).
The control/status byte
will be inserted for
parameterization (KL1501).
K-Bus
Interbus bus coupler
BK4000
To the bus terminal
Data H
Data L
C/S
C/S
C/S
D3
D2
D1
D0
0
The terminal is
mapped in the
bus coupler.
Other bus couplers and
further information You will find further information on the mapping configuration of bus
couplers in the annex of the respective bus coupler manual under the
heading of Configuration of masters.
i
Note
In the appendix it exists an outline of the possible mapping configurations
in dependency of the adjustable parameters.
Parameterization with the
KS2000 software Using the KS2000 configuration software, the parameterization operations
can be carried out independently of the field bus system via the bus
couplers serial interface.