BECKHOFF BC3100 - Manual (Page 43)

Annex
BC3100 43
Part for bit-oriented data, digital outputs:
Position in
block
PLC Task
Process image Description
POS07 QX12.0 Output signal 1st channel
POS07 QX12.1 Output signal 2nd channel
POS08 QX12.2 Output signal 1st channel
POS08 QX12.3 Output signal 2nd channel
POS09 QX12.4 Output signal 1st channel
POS09 QX12.5 Output signal 2nd channel
POS18 QX12.6 Output signal 1st channel
POS18 QX12.7 Output signal 2nd channel
POS19 QX13.0 Output signal 1st channel
POS19 QX13.1 Output signal 2nd channel
Part for byte-oriented data, analog inputs:
Position in
block
PLC task
Process image Description
POS10 IW0 Input signal 1st channel
POS10 IW2 Input signal 2nd channel
POS13 IW4 Input signal 1st channel
POS13 IW6 Input signal 2nd channel
Part for bit-oriented data, digital inputs:
Position in
block
PLC task
Process image Description
POS02 IX7.0 Input signal 1st channel
POS02 IX7.1 Input signal 2nd channel
POS03 IX7.2 Input signal 1st channel
POS03 IX7.3 Input signal 2nd channel
POS04 IX7.4 Input signal 1st channel
POS04 IX7.5 Input signal 2nd channel
POS05 IX7.6 Input signal 1st channel
POS05 IX7.7 Input signal 2nd channel
POS06 IX8.0 Input signal 1st channel
POS06 IX8.1 Input signal 2nd channel
POS15 IX8.2 Input signal 1st channel
POS15 IX8.3 Input signal 2nd channel
POS16 IX8.4 Input signal 1st channel
POS16 IX8.5 Input signal 2nd channel
POS17 IX8.6 Input signal 1st channel
POS17 IX8.7 Input signal 2nd channel
Analog terminals complete (default setting)
All terminals are assigned to the process image of the PLC task, and
analog terminals are mapped completely.
For an understanding of the subject matter, note that, when complete
mapping is set, input terminals (KL3xxx) also have output data and output
terminals (KL4xxx) also have input data (3 bytes per channel).
Part for byte-oriented data, analog outputs:
Position in
block
PLC task
Process image Description
POS10 QB0 Control byte, 1st channel
POS10 QB1 Blank, owing to word alignment
POS10 QW2 Register value, 1st channel
POS10 QB4 Control byte, 2nd channel
Position in PLC task Description