BECKHOFF CP6003 - Manual (Page 4)

Eiserstraße 5 / D-33415 Verl / Phone 05246/963-0 / Fax 05246/963-149
4 Operating Instructions Control Panel CP6003
CP6003
Safety instructions
Please read through the following instructions carefully. Keep these
operating instructions for later use.
If the Control Panel is fitted with the optional Touch Screen it must be
switched off in order to clean the LCD screen.
The operator’s duties
National regulations
depending on the machine
type
Test regulations
Depending on the type of machine and plant in which the control panel is
used, national regulations governing the controllers of such machines will
apply, and must be observed by the operator. These regulations cover,
amongst other things, the intervals between inspections of the controller.
The operator must initiate such inspections in good time.
Only competent personnel
may open the housing of
the control panel The operator must ensure that only competent electricians open the control
panel housing.
Software knowledge Every user must be familiar with any of the functions of the software
installed on the PC that he can reach.
Make operating instructions
accessible The contents of these operating instructions must be known to the user of
the control panel and to every assembly worker who fits, removes or opens
the device.
Procedure in the event of a
fault In the event of faults at the control panel, the list in the section on “Faults”
can be used to determine the measures to be taken.
The BECKHOFF Service number:
for Germany: 05246/963-460
International: +49-5246/963-460
for North America: +1-952-890-0000
The user’s duties
Read the operating
instructions Anyone who uses the control panel must have read these operating
instructions.
Software knowledge Every user must be familiar with any of the functions of the software
installed on the PC that he can reach.