BECKHOFF CP6003 - Manual (Page 5)

Eiserstraße 5 / D-33415 Verl / Phone 05246/963-0 / Fax 05246/963-149
Operating Instructions Control Panel CP6003 5
CP6003
Appropriate Use
The CP6003 Control Panel is designed for industrial application in machine
and plant engineering. An LCD display and a Touch Screen (optional) are
mounted in a metal housing.
Do not use the control
panel in areas of explosive
hazard The control panel must not be used where there is a risk of explosion.
The following technical data must be observed during operation:
Environmental conditions Ambient temperature: 0 to 55 °C
Atmospheric humidity: Maximum 90%, non-condensing
Shock resistance Shock resistance: Vibrations 5 G at 10..55 Hz
Vibrations 1 G at 55..500 Hz
Impact resistance 30 G
Protection type: Front: IP65
Rear: IP20
Power supply Supply voltage: 100-240 V alternating voltage,
50-60 Hz single phase
A tested 3-core cable with a minimum cross-section of 0.75 mm² is to be
used to connect the device.
Power consumption Power consumption:
ON mode:
65 W typical
OFF mode: 5 W maximum
Electromagnetic
compatibility Emission of interference: according to EN 50081-2
Resistance to interference: according to EN 50082-2
FCC Class A
Transport and storage The same values for atmospheric humidity and shock resistance are to be
observed during transport and storage as in operation. Suitable packaging
of the control panel can improve the resistance to impact during transport.
The ambient temperature during storage and transport must be between –
20 °C and +65 °C.