BECKHOFF C9900-G0xx - Manual (Page 21)

Installation
C9900-G0xx 19
4 Installation
4.1 Transport and unpacking
The specified storage conditions must be adhered to (see " Technical data ").
4.1.1 Transport
Despite the robust design of the unit, the components are sensitive to strong vibrations and impacts.
During transport the device must therefore be protected from mechanical stress. Therefore, please use
the original packaging.
Attention
Risk of damage to the device
If the device is transported in cold weather or is exposed to extreme variations in
temperature, make sure that moisture (condensation) does not form on or inside the
device.
The device should be left to adapt to room temperature slowly before it is commissioned. Should
condensation occur, a delay time of approximately 12 hours must be allowed before the unit is switched
on.
4.1.2 Unpacking
Proceed as follows to unpack the unit:
1. Remove packaging.
2. Do not discard the original packaging. Keep it for future relocation.
3. Check the delivery for completeness by comparing it with your order.
4. Please keep the associated paperwork. It contains important information for handling the unit.
5. Check the contents for visible shipping damage.
If you notice any shipping damage or inconsistencies between the contents and your order, you should
notify Beckhoff Service.